Corrosion resistance of welded steel tubes

Release Time :

2022-10-27 13:28

When the T-welded steel pipe contains Ni, it has strong corrosion resistance in the acidic environment. In the environment containing sulfuric acid or hydrochloric acid, the higher the content of Ni in the T-welded steel pipe, the stronger the corrosion resistance. In the general environment, just add Cr to T-welded steel pipe can prevent the occurrence of erosion phenomenon. The poor condition of steel strip edge is another important cause of wrong edge. Effect of mass flow rate, heat flux and structural parameters (ratio Dc/D of spiral curvature diameter to T-welded steel pipe diameter) on saturated bubble boiling heat transfer coefficient in vertical spiral pipe.
In the production of T-welded steel pipe, the wrong edge often occurs, and there are many influencing factors. In production practice, steel pipe is often degraded by the wrong edge. Therefore, it is necessary to analyze the causes of spiral steel pipe misalignment and its preventive measures.
Due to the poor shape and dimensional accuracy of the untrimmed steel lead and tail, it is easy to cause hard bending of the steel belt and cause wrong edge. Simulation parameters range: vertical pipe: pipe diameter D=lOmm, pipe length L=660mm; Three kinds of vertical T-welded steel pipes: pipe diameter D=10mm, the ratio of curvature diameter of T-welded steel pipes to spiral pipe diameter changes are Dc/D= 15,20,25, spiral pitch Pt=20mm, pipe length L=503mm, L=660mm, L=817MM. Mass flow G=200~400Kg/(m'2·s), heat flux q=5~15KW/m'2, saturation pressure p, saturation =0.414880MPa, saturation temperature T, saturation =283.15K.

Application field of square tube

Application: Widely used in machinery manufacturing, construction industry, metallurgical industry, agricultural vehicles, agricultural greenhouses, automobile industry, railway, highway guardrail, container skeleton, furniture, decoration and steel structure fields.

2022-10-27

Effect of adding elements to galvanized steel pipe on its properties

Inrecent years, ITU argon pipeline welding method has been widely usedin petrochemical industry, power construction and energy system.Different from the common arc extinguishing and priming process ofmanual arc welding, manual arc welding fills the cover surface.

2022-10-27

Stainless steel pipe what hardness index

In the stainless steel pipe standard, Brinell hardness is the most widely used, often to indentation diameter to indicate the hardness of the material, both intuitive and convenient. But for harder or thinner steel pipe is not suitable.

2022-10-27

What are the classifications of seamless steel pipes

The materials are ordinary and high quality carbon structural steel (Q215-A ~ Q275-A and No. 10 ~ 50 steel), low alloy steel (09MnV, 16Mn, etc.), alloy steel, stainless acid resistant steel, etc. According to the purpose, it is divided into general purpose (for water and gas pipelines and structural parts, mechanical parts) and special purpose (for boiler, geological exploration, bearing, acid resistance, etc.).

2022-10-27

Performance of square pipe

Square pipe, square pipe and rectangular pipe is a kind of address, that is, the side length is equal and unequal steel pipe. It is made of strip steel through processing and rolling. Generally, strip steel is unpacked, leveled, crimped, welded to form a round tube, which is then rolled into a square tube and cut to the required length.

2022-10-27

Corrosion resistance of welded steel tubes

In the production of T-welded steel pipe, the wrong edge often occurs, and there are many influencing factors. In production practice, steel pipe is often degraded by the wrong edge. Therefore, it is necessary to analyze the causes of spiral steel pipe misalignment and its preventive measures.

Shandong Xinghan Aluminum Industry Group Co., Ltd.

Tel：+86 13153175915
Whatsapp：+86 13153175915
Email：luan@jyh-steel.com
Address : 5th Floor, Building 11, No. 6055, Jinhai Road, Fengxian District, Shanghai